Navigation :

LhoSipApp

Alarms

The following 293 alarms may be generated by N2SIP Application “LhoSipApp”.

Show: Alarm Warning Clear Notice

No alarms found that match search criteria.

LhoSipApp

SP-LH-10001
NOTICE

Application

Default Logic App Name for requests is '%s'.

Cause: Parameter configuration at startup. Configured default LogicApp application name.	%s = The configured default logic application name.
Resolution: None.

SP-LH-10002
NOTICE

Application

Default SIGTRAN App Name for requests is '%s'.

Cause: Parameter configuration at startup. Configured default SigtranApp application name.	%s = The configured default SIGTRAN application name.
Resolution: None.

SP-LH-10007
NOTICE

Application

Configuring Language Map '%s'.

Cause: Parameter configuration at startup. Language map configuration.	%s = The configured language map name.
Resolution: None.

SP-LH-10008
NOTICE

Application

Configuring SRP '%s'.

Cause: Parameter configuration at startup. SRP configuration.	%s = The configured SRP name.
Resolution: None.

SP-LH-10009
WARNING

Configuration

Requested Logic App '%s' is not a known Application. Force OFFLINE.

Cause: Configured logic app agent is an unknown application.	%s = The configured Logic app name.
Resolution: Check Logic agent application configuration.

SP-LH-10010
WARNING

Configuration

No Logic App is configured. Force OFFLINE.

Cause: No logic app agent is configured. Call processing logic not enabled.	-
Resolution: Check Logic app configuration.

SP-LH-10011
WARNING

Configuration

Requested SIGTRAN App '%s' is not a known Application.

Cause: Configured SIGTRAN app is an unknown application.	%s = The configured SIGTRAN app name.
Resolution: Check SIGTRAN application configuration.

SP-LH-10012
NOTICE

Application

Mask collected DIGITS in PLAYED EDR = %s

Cause: Parameter configuration at startup. Mask entered DIGITS in prompt/collect EDRs.	%s = Whether or not mask entered digits in prompt/collect EDRs.
Resolution: None.

SP-LH-10069
NOTICE

Application

Compact duplicated consecutive 180 Ringing (non-SDP) = %s.

Cause: Parameter configuration at startup. Handling of 180 Ringing (without SDP) when attempting non-ETC B-Legs.	%s = The configured behavior for suppressing duplicate 180 Ringing.
Resolution: None.

LhoSipApp::LhoSipInstance

SP-LH-10101
WARNING

Internal

Unexpected clean shutdown in SCC State %s.

Cause: The SCC service logic shutdown cleanly but the SCC State had not returned to state NONE.	%s = The non-NONE SCC State at the clean call shutdown.
Resolution: Contact N-Squared Support.

SP-LH-10102
WARNING

Configuration

Request to send language '%s' using SRP '%s' without a language mechanism.

Cause: Attempt to use SRP language for which no language transport mechanism is configured.	%s = The requested language. %s = The SRP definition name.
Resolution: Check SRP language configuration. Check inbound requested language.

SP-LH-10103
WARNING

Configuration

SRP '%s' references unknown language map '%s'.

Cause: Attempt to use a language map which is not defined.	%s = The SRP definition name. %s = The requested language map name.
Resolution: Check SRP/SSP language map configuration.

SP-LH-10104
WARNING

Configuration

Language '%s' not known in SRP '%s' language map '%s'.

Cause: Requested language is not known in SSP language map.	%s = The requested language. %s = The SRP definition name. %s = The language map name.
Resolution: Check SRP/SSP language map configuration.

SP-LH-10105
WARNING

Configuration

SRP '%s' missing NAP mechanism language extension Type.

Cause: SRP configuration has missing MAP mechanism language extension type.	%s = The SRP definition name.
Resolution: Check SRP/SSP language mechanism configuration.

SP-LH-10106
WARNING

Configuration

SRP '%s' uses unsupported mechanism '%s'.

Cause: SRP uses unsupported language mechanism.	%s = The SRP definition name. %s = The requested SRP definition language mechanism.
Resolution: Check SRP language mechanism configuration.

SP-LH-10107
NOTICE

Application

No Available Trunk matched for ETC Routing Address '%s'.

Cause: No available trunk matched for ETC routing address.	%s = The routing address digits.
Resolution: None.

SP-LH-10108
WARNING

Job

Failed to get correlation ID for interaction: %s

Cause: Failed to get a correlation ID for interaction.	%s = The error result generated when trying to assign the correlation ID.
Resolution: Review the associated error result. Check that the SIGTRAN app is running. Check that a sufficient correlation ID pool size is assigned.

SP-LH-10109
WARNING

Internal

Got %s Component after instance shutdown.

Cause: Received component after application shutdown.	%s = The received component type.
Resolution: Contact N-Squared Support.

SP-LH-10110
WARNING

Job

Received late AssistRequestInstructions for abandoned interaction. Discarding.

Cause: Received late AssistRequestInstructions after giving up waiting.	-
Resolution: Capture INAP/CAMEL call traces, check if SRP is overloaded.

SP-LH-10111
WARNING

Job

PlayAnnouncement failed with Error Code %d.

Cause: The PlayAnnouncement request was rejected by the on-switch or external SRP. The service logic may choose to continue, or may abandon processing.	%d = The CAMEL/INAP operation error code.
Resolution: Check the switch/SRP announcement configuration against the service logic expectations.

SP-LH-10112
WARNING

Job

PromptAndCollectUserInformation failed with Error Code %d.

Cause: The PromptAndCollectUserInformation request was rejected by the on-switch or external SRP. The service logic may choose to continue, or may abandon processing.	%d = The CAMEL/INAP operation error code.
Resolution: Check the switch/SRP announcement configuration against the service logic expectations.

SP-LH-10113
WARNING

Job

Received unsupported INAP %s OpCode %s from transaction %s

Cause: Received unsupported INAP/CAMEL Operation Code.	%s = The TCAP component type. %s = The unsupported INAP Operation Code. %s = The name of the transaction (SSP or SRP).
Resolution: Capture INAP/CAMEL call traces, confirm expected SSP behavior, check SSP model configuration.

SP-LH-10114
WARNING

Message

Received SCC-DO-ALEG-DECLINE-FINAL but call is not declineable. Hangup (BYE) instead.

Cause: Received SCC-DO-ALEG-DECLINE-FINAL for call with INVITE already confirmed, or for outbound INVITE. Use BYE instead.	-
Resolution: Contact N-Squared support.

SP-LH-10115
WARNING

Message

Received SCC-DO-ALEG-OUTBOUND-INVITE for unresolved called party '%s'.

Cause: Received SCC-DO-ALEG-OUTBOUND-INVITE for unresolved call party.	%s = The unresolved called party.
Resolution: Contact N-Squared support.

SP-LH-10117
WARNING

Internal

New SCC guard timer %s overwrites previous active SCC guard timer %s. Impossible.

Cause: A new SCC State machine guard timer was started while a previous one was still running.	%s = The defined timer action. %s = The existing SCC guard timer action.
Resolution: Contact N-Squared Support.

SP-LH-10118
WARNING

Internal

Request to cancel SCC guard timer %s but no SCC guard timer is active in SCC State %s. Impossible.

Cause: The internal SCC State machine attempt to cancel a SCC guard timer which is not currently running.	%s = The defined timer action. %s = The current SCC State.
Resolution: Contact N-Squared Support.

SP-LH-10119
WARNING

Internal

Request to cancel SCC guard timer %s but SCC guard timer %s is active instead in SCC State %s. Impossible.

Cause: Request to cancel SCC guard timer that does not match current SCC guard timer.	%s = The defined timer action. %s = The existing SCC guard timer action. %s = The current SCC State.
Resolution: Contact N-Squared Support.

SP-LH-10121
WARNING

Job

Service logic failed to respond (following caller abandon).

Cause: The SCC service logic shutdown failed to respond to the first invite request, even after the caller abandoned the call.	-
Resolution: Check service logic for possible delays.

SP-LH-10123
WARNING

Job

Failure constructing/sending INAP announcement: %s

Cause: An error occurred while attempting to construct or send the INAP PA or PACUI to send for an external announcement.	%s = The reason for the failure to construct/send the INAP announcement operation PA or PACUI.
Resolution: Check announcement ID, language, variable part values, and audio encoding.

N2::ASN1

SV-AS-10000
WARNING

Internal

ASN1::structure_check: Structure Check Failed: %s

Cause: ASN.1 structure check failure.	%s = Error result when trying to encode ASN.1 structure.
Resolution: Contact N-Squared support.

N2::Application

SV-AP-10012
NOTICE

Application

Trace Level is '%s'.

Cause: Parameter configuration at startup. Configured application trace level.	%s = The configured application trace level.
Resolution: None.

SV-AP-10013
NOTICE

Application

Trace Level Max is '%s'.

Cause: Parameter configuration at startup. Configured application max trace level.	%s = The configured max trace level.
Resolution: None.

SV-AP-10014
NOTICE

Application

Trace Per Second is '%s'.

Cause: Parameter configuration at startup. Configured application trace per second.	%s = The configured trace per second.
Resolution: None.

SV-AP-10015
NOTICE

Application

Retaining '%d' shutdown instances.

Cause: Parameter configuration at startup. Configured application instance retention count.	%d = The configured shutdown instance retention count.
Resolution: None.

SV-AP-10016
NOTICE

Application

Statistics Slice Count is '%s'.

Cause: Parameter configuration at startup. Configured application statistics slice count.	%s = The configured statistics slice count.
Resolution: None.

SV-AP-10017
NOTICE

Application

Statistics Slice Seconds is '%s'.

Cause: Parameter configuration at startup. Configured application statistics slice seconds.	%s = The configured statistics slice seconds.
Resolution: None.

SV-AP-10019
NOTICE

Application

EDR Application Name = '%s'.

Cause: Parameter configuration at startup. Configured EDR application name.	%s = The configured EDR application name.
Resolution: None.

SV-AP-10020
NOTICE

Application

EDR Default Stream = '%s'.

Cause: Parameter configuration at startup. Configured EDR stream.	%s = The configured EDR stream.
Resolution: None.

SV-AP-10021
WARNING

Configuration

Cannot write EDRs. Configured EDR App '%s' is not a known Application.

Cause: Configured EDR application to utilize does not map to known application.	%s = The name of the EDR app that is not known.
Resolution: Check application configuration defines configured EDR application. Check configured EDR application exists and is configured.

SV-AP-10029
NOTICE

Application

EDRs are Supported but NOT Enabled.

Cause: Parameter configuration at startup. Application supports EDRs but they are not enabled.	-
Resolution: None.

SV-AP-10030
WARNING

Application

Application did not handle timeout reason '%s'.

Cause: Received timeout that the underlying application did not handle.	%s = The reason the timeout was not handled.
Resolution: Contact N-Squared support.

SV-AP-10031
NOTICE

Application

Configuration Scalar Update of '%s' %s.

Cause: Application configuration scalar value updated.	%s = The configuration key that was updated. %s = Whether or not the update was successful.
Resolution: None.

SV-AP-10032
NOTICE

Application

Configuration Vector Change of '%s' [%s] Succeeded.

Cause: Application configuration vector updated.	%s = The updated configuration key. %s = The update action.
Resolution: None.

SV-AP-10033
ALARM

Application

Application transition from %s -> %s.

Cause: Application access has transitioned between ONLINE <=> SHUTDOWN/OFFLINE/QUIESCE.	%s = The original access level name (ONLINE). %s = The new access level name (SHUTDOWN/OFFLINE/QUIESCE).
Resolution: Confirm that this state change is expected.

SV-AP-10033
CLEAR

Application

Application transition from %s -> %s.

Cause: Application access has transitioned between SHUTDOWN/OFFLINE/QUIESCE <=> ONLINE.	%s = The original access level name (SHUTDOWN/OFFLINE/QUIESCE). %s = The new access level name (ONLINE).
Resolution: Confirm that this state change is expected.

SV-AP-10034
WARNING

Internal

Instance [%s] already over when performing instance_over().

Cause: Instance received duplicate 'over' handler.	%s = Instance index.
Resolution: Contact N-Squared support.

SV-AP-10035
WARNING

Internal

Instance [%s] not found when performing instance_over().

Cause: Instance not found when performing over handler.	%s = Instance index.
Resolution: Contact N-Squared support.

SV-AP-10038
WARNING

Application

Failed to cancel timer [%s]: %s

Cause: Failed to cancel in progress timer.	%s = The reason the timer could not be canceled. %s = The error result when trying to cancel the timer.
Resolution: Review the associated error reason. Review the associated error result. Contact N-Squared support.

SV-AP-10039
WARNING

Internal

Discarding Message from unknown sender '%s'.

Cause: Received application message from unknown sender.	%s = The unknown sender.
Resolution: Contact N-Squared support.

SV-AP-10040
WARNING

Application

Failed to process %s from %s: %s

Cause: Failed to process admin queue message.	%s = The message. %s = The sending application. %s = The error result when trying to read from the message queue.
Resolution: Contact N-Squared support.

SV-AP-10041
WARNING

Application

Failed to process %s from %s: %s

Cause: Failed to process user queue message.	%s = The message. %s = The sending application. %s = The error result when trying to read from the message queue.
Resolution: Contact N-Squared support.

SV-AP-10042
WARNING

Configuration

Configuration Request for '%s' (%s) Failed: %s

Cause: Failed to query application configuration vector.	%s = The configuration key. %s = The configuration row key. %s = The error result when trying to query the configuration vector.
Resolution: Review the associated error result. Check the inbound message content construction.

SV-AP-10043
WARNING

Message

Resources Request for '%s' (%s) Failed: %s

Cause: Failed to query application resource.	%s = The resource key. %s = The resource key row. %s = The error result when trying to query the resource.
Resolution: Review the associated error result. Check the inbound message content construction.

SV-AP-10044
WARNING

Configuration

Configuration Update of '%s' Failed: %s

Cause: Failed to update application configuration scalar.	%s = The configuration key. %s = The error result when trying to update the configuration scalar.
Resolution: Review the associated error result. Check the configuration update message content construction.

SV-AP-10045
WARNING

Application

Received instance message %s with no context. Discarding.

Cause: Received instance message with no context.	%s = The message.
Resolution: Review message construction. Ensure instance message contains instance context.

SV-AP-10046
WARNING

Application

Configuration environment translation for '\${%s}' is not defined.

Cause: Configuration environment not defined.	%s = The configuration variable name.
Resolution: Check environment configuration.

SV-AP-10047
WARNING

Application

Command `%s` failed to execute: %s

Cause: Failed to execute variable command.	%s = The error message generated when trying to execute the command. %s = The command.
Resolution: Review the associated command error. Check application execution permissions. Check command syntax and structure.

SV-AP-10048
WARNING

Application

Command `%s` died with signal %d.

Cause: Variable command execution exited with non-zero exit code.	%s = The command. %d = The exit signal.
Resolution: Review the associated error signal. Check application execution permissions. Check command syntax and structure.

SV-AP-10049
WARNING

Application

Command `%s` exited with non-zero value %d.

Cause: Variable command execution exited with non-zero exit code.	%s = The command. %d = The exit code.
Resolution: Review the associated exit code. Check command syntax and structure.

SV-AP-10050
WARNING

Resource
Configuration

Hostname '%s' is not known.

Cause: Failed to convert Hostname into address. Hostname is not known.	%s = The hostname.
Resolution: Check Hostname configuration. Check address configuration. Check DNS availability.

SV-AP-10051
WARNING

Application

Unhandled Message '%s' for Context '%s' from App '%s'.

Cause: Application unable to handle message.	%s = The message. %s = The message context. %s = The sending application name.
Resolution: Contact N-Squared support.

SV-AP-10052
ALARM

Application

Application is now OVERLOADED.

Cause: Application is now overloaded to the point where processing is affected.	-
Resolution: Check application traffic levels and configuration.

SV-AP-10052
CLEAR

Application

Application is now %s (not OVERLOADED).

Cause: Application is no longer overloaded.	%s = The new loading level (NORMAL or HIGH)
Resolution: Check application traffic levels and configuration.

SV-AP-10053
NOTICE

Application

Throttle Enabled: max %d instances, max tps (%d average over %d secs).

Cause: Parameter configuration at startup. Configured application throttling parameters.	%d = The configured maximum active instance count. %d = The configured maximum TPS (new instances per second). %d = The configured sliding window (in seconds) for measuring TPS.
Resolution: None.

SV-AP-10054
ALARM

Application

Application is now at HIGH LOAD.

Cause: Application is now at high-load (processing is not yet affected).	-
Resolution: Check application traffic levels and configuration.

SV-AP-10054
CLEAR

Application

Application is now %s (not HIGH LOAD).

Cause: Application is no longer at high-load.	%s = The new loading level (NORMAL)
Resolution: Check application traffic levels and configuration.

SV-AP-10056
NOTICE

Application

Resource Vector Operation '%s' Succeeded.

Cause: Application resource vector operation successful.	%s = The vector operation key.
Resolution: None.

SV-AP-10057
WARNING

Internal

ERROR thawing %d byte envelope: %s

Cause: Failed to thaw message byte envelope.	%d = The message envelope length. %s = The error that occurred trying to thaw the payload.
Resolution: Contact N-Squared support.

SV-AP-10058
WARNING

Configuration

Resource Operation of '%s' Failed: %s

Cause: Failed to perform resource operation.	%s = The resource key. %s = The error result when trying to perform the resource operation.
Resolution: Review the associated error result. Check the configuration update message content construction.

N2::Application::AppInstance

SV-AP-10201
WARNING

Job

Shutdown/Abort: %s

Cause: A single instance has received an unexpected shutdown/abort message. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc.	%s = The abort reason.
Resolution: Review the associated abort reason for further details.

SV-AP-10202
WARNING

Configuration

Cannot write EDRs. EDR Application Name is not correctly configured.

Cause: Cannot write EDR due to no configured EDR application.	-
Resolution: Check configured EDR application exists and is configured.

SV-AP-10203
WARNING

Store

Discarded EDR event '%s' after shutdown.

Cause: Received EDR write event after application shutdown.	%s = EDR event.
Resolution: Review the associated triggering event. Review shutdown procedure. Ensure no traffic is being processed when application shutdown is triggered.

SV-AP-10204
WARNING

Store

Failed sending EDR to EdrApp: %s

Cause: Failed to send EDR record to EDR writer process.	%s = The error result when attempting to write the EDR to the writer process.
Resolution: Review the associated error result. Contact N-Squared support.

SV-AP-10205
WARNING

Application

Unhandled timer '%s' (discarded).

Cause: Received timeout that the underlying application did not handle timeout. The timer was discarded.	%s = The reason the timeout was not handled.
Resolution: Contact N-Squared support.

SV-AP-10206
WARNING

Application

Unhandled message '%s' (discarded).

Cause: A message was received that was not handled. The message was discarded.	%s = The unhandled message.
Resolution: Contact N-Squared support.

N2::Application::SipApp

SP-SP-10001
NOTICE

Application

Will listen for SIP UDP on '%s:%d'.

Cause: Parameter configuration at startup. SIP UDP bind configuration.	%s = The configured SIP bind host for UDP. %d = The configured SIP bind port for UDP.
Resolution: None.

SP-SP-10002
NOTICE

Application

Our self-declared SIP User Agent is '%s'.

Cause: Parameter configuration at startup. SIP user agent configuration.	%s = The self defined user agent configuration.
Resolution: None.

SP-SP-10003
NOTICE

Application

Our advertised Allowed Method List is '%s'.

Cause: Parameter configuration at startup. SIP advertised allowed method list configuration.	%s = The configured allowed method list.
Resolution: None.

SP-SP-10004
NOTICE

Application

Contact Header: Transport = %s, User = '%s', Host = '%s', Port = %s.

Cause: Parameter configuration at startup. Contact header construction.	%s = The configured contact transport. %s = The configured contact user. %s = The configured contact host. %s = The configured contact port.
Resolution: None.

SP-SP-10005
NOTICE

Application

Use SIP PRACK (100rel) on INVITE Response, Policy = '%s'.

Cause: Parameter configuration at startup. Use SIP PRACK on invite response configuration.	%s = The configured inbound PRACK policy.
Resolution: None.

SP-SP-10006
NOTICE

Application

Send 'Allow' in INVITE 1xx Response, Policy = '%s'.

Cause: Parameter configuration at startup. Send allow in invite response configuration.	%s = The configured allow 1xx policy.
Resolution: None.

SP-SP-10008
NOTICE

Application

Create Early Dialog on INVITE 100 Response = %s.

Cause: Parameter configuration at startup. Create early dialog on invite response configuration.	%s = The configured early dialog 100.
Resolution: None.

SP-SP-10009
NOTICE

Application

SIP Max Forwards = %s.

Cause: Parameter configuration at startup. SIP max forwards configuration.	%s = The configured max SIP forwards.
Resolution: None.

SP-SP-10010
NOTICE

Application

Merge SIP EDR Request + Response = %s.

Cause: Parameter configuration at startup. Merge SIP EDR request/response configuration.	%s = The configured SIP EDR merge.
Resolution: None.

SP-SP-10011
NOTICE

Application

SIP Peer: ID = '%s', Host = %s%s

Cause: Parameter configuration at startup. SIP peer configuration.	%s = The configured SIP peer ID. %s = The configured SIP host. %s = The configured SIP port (if configured).
Resolution: None.

SP-SP-10012
NOTICE

Application

Trunk: Leading = '%s', SIP Peer ID = '%s'.

Cause: Parameter configuration at startup. SIP trunk configuration.	%s = The configured trunk leading. %s = The configured SIP peer ID.
Resolution: None.

SP-SP-10013
NOTICE

Application

Out-Registration Expiry = %s, Retry = %s, Buffer = %s.

Cause: Parameter configuration at startup. Out registration expiry configuration.	%s = The configured out registration expires. %s = The configured out registration retry. %s = The configured out registration buffer.
Resolution: None.

SP-SP-10014
NOTICE

Application

Endpoint: Leading = '%s', SIP Peer ID = '%s', Contact User = '%s'.

Cause: Parameter configuration at startup. SIP endpoint configuration.	%s = The configured leading. %s = The configured SIP peer ID. %s = The configured contact URI.
Resolution: None.

SP-SP-10015
NOTICE

Application

SIP Account: ID = '%s', Security = %s.

Cause: Parameter configuration at startup. SIP user configuration.	%s = The configured SIP user ID. %s = Whether the security is password protected or empty.
Resolution: None.

SP-SP-10017
NOTICE

Application

User Schema = %s, ACK is open = %s, BYE is open = %s, OPTIONS is open = %s.

Cause: Parameter configuration at startup. SIP user schema configuration.	%s = The overall user authentication schema. %s = Are ACK requests open? %s = Are BYE requests open? %s = Are OPTIONS requests open?
Resolution: None.

SP-SP-10018
NOTICE

Application

Reading SIP Registry Cache '%s'.

Cause: Application startup. Reading SIP registry cache.	%s = The SIP registry cache file.
Resolution: None.

SP-SP-10019
NOTICE

Application

Loading SIP Registry Cache: '%s'.

Cause: Application startup. Loading SIP registry cache.	%s = The SIP registry cache file.
Resolution: None.

SP-SP-10020
NOTICE

Application

Read SIP Registry Cache %d Record(s).

Cause: Application startup. Read SIP registry cache records.	%d = The amount of read SIP registry cache records.
Resolution: None.

SP-SP-10021
WARNING

Resource

Failed to load SIP Registry '%s': %s

Cause: Failed to load SIP registry.	%s = The SIP registry cache file. %s = The error that occurred when trying to read the SIP registry.
Resolution: Review the associated error result.

SP-SP-10022
WARNING

Resource

SIP Registry Cache '%s' Empty File.

Cause: SIP registry cache is empty.	%s = The SIP registry cache file.
Resolution: Confirm the SIP registry cache file is empty. Remove the SIP registry cache file.

SP-SP-10023
WARNING

Resource

SIP Registry Cache '%s' Open/Read Error: %s

Cause: Unable to read SIP registry cache.	%s = The SIP registry cache file. %s = The error the occurred when trying to read the SIP registry cache file.
Resolution: Review the associated error result. Check SIP registry cache file exists and is readable.

SP-SP-10024
NOTICE

Application

SIP Registry Cache '%s' no file.

Cause: Application startup. No SIP registry cache file.	%s = The SIP registry cache file.
Resolution: None.

SP-SP-10025
NOTICE

Application

SIP Registry Cache is not configured.

Cause: Parameter configuration at startup. Not configured to use SIP registry cache.	-
Resolution: None.

SP-SP-10026
NOTICE

Application

Local RTP Announcements will use RtpApp name '%s'.

Cause: Parameter configuration at startup. Configured to use RTP announcements with the indicated RtpApp.	%s = The RTP Application name.
Resolution: None.

SP-SP-10027
NOTICE

Application

Early Media (183 Session Progress) Policy = %s.

Cause: Parameter configuration at startup. Early media policy configuration.	%s = The configured early media policy.
Resolution: None.

SP-SP-10030
NOTICE

Application

RTP Response Timeout = %d (ms).

Cause: Parameter configuration at startup. RtpApp inbound RTP acceptance timeout.	%d = The configured RTP acceptance timeout (ms).
Resolution: None.

SP-SP-10031
NOTICE

Application

RTP Max Play Seconds = %d (s).

Cause: Parameter configuration at startup. RtpApp inbound RTP play timeout.	%d = The configured RTP play timeout (s).
Resolution: None.

SP-SP-10032
NOTICE

Application

Local RTP Announcements are not enabled.

Cause: Parameter configuration at startup. Not configured to use local RTP announcements.	-
Resolution: None.

SP-SP-10033
NOTICE

Application

SDP Owner Username = '%s'.

Cause: Parameter configuration at startup. SDP owner username.	%s = The configured SDP owner username for SDP constructed by this app.
Resolution: None.

SP-SP-10034
NOTICE

Application

SDP Owner Host = '%s'.

Cause: Parameter configuration at startup. SDP owner host name/IP setting.	%s = The configured SDP owner host name/IP.
Resolution: None.

SP-SP-10035
NOTICE

Application

SDP Suspend Policy = %s.

Cause: Parameter configuration at startup. SDP suspend policy setting.	%s = The configured SDP suspend policy.
Resolution: None.

SP-SP-10036
NOTICE

Application

SDP Suspend Host = '%s'.

Cause: Parameter configuration at startup. SDP suspend host name/IP setting.	%s = The configured SDP suspend host name/IP.
Resolution: None.

SP-SP-10037
NOTICE

Application

SDP Suspend Inactive Port = %d.

Cause: Parameter configuration at startup. SDP suspend inactive port number setting.	%d = The configured SDP suspend inactive port number.
Resolution: None.

SP-SP-10038
WARNING

Message

Requested domain '%s' is not our domain '%s'.

Cause: Requested domain is not our configured domain.	%s = The request authentication domain. %s = The SIP public domain.
Resolution: Check inbound request domain matches configured domain.

SP-SP-10039
WARNING

Configuration

From user '%s' does not match an account at this domain '%s'.

Cause: Address not subscribed for domain.	%s = The authentication PSTN. %s = The SIP public domain.
Resolution: Check domain configuration.

SP-SP-10040
WARNING

Internal

Terminated Transaction Key '%s' still registered at instance_over.

Cause: Terminated transaction key still registered at instance shutdown.	%s = The terminated transaction key.
Resolution: Contact N-Squared support.

SP-SP-10041
WARNING

Internal

Non-Terminated Transaction Key '%s' still %s (and registered) at instance_over.

Cause: Non terminated transaction key present at instance shutdown.	%s = The transaction key. %s = The current transaction key state.
Resolution: Contact N-Squared support.

SP-SP-10042
WARNING

Internal

Non-Terminated Transaction Key '%s' still %s (but not registered!) at instance_over.

Cause: Unregistered non terminated transaction key present at instance shutdown.	%s = The transaction key. %s = The current transaction key state.
Resolution: Contact N-Squared support.

SP-SP-10043
WARNING

Internal

Terminated Dialog Key '%s' still registered at instance_over.

Cause: Terminated dialog key still registered at instance shutdown.	%s = The terminated dialog key.
Resolution: Contact N-Squared support.

SP-SP-10044
WARNING

Internal

Non-Terminated Dialog Key '%s' still %s (and registered) at instance_over.

Cause: Non terminated dialog key still present at instance shutdown.	%s = The non terminated dialog key. %s = The current non terminated dialog key state.
Resolution: Contact N-Squared support.

SP-SP-10045
WARNING

Internal

Non-Terminated Dialog Key '%s' still %s (but not registered!) at instance_over.

Cause: Unregistered non terminated dialog key still present at instance shutdown.	%s = The unregistered non terminated dialog key. %s = The current unregistered non terminated dialog key state.
Resolution: Contact N-Squared support.

SP-SP-10047
NOTICE

Application

Writing SIP Registry Cache '%s'.

Cause: Application startup. Writing SIP registry cache.	%s = The SIP registry cache file.
Resolution: None.

SP-SP-10048
WARNING

Configuration

SIP Registry Cache '%s' Open/Write Error: %s

Cause: Failed to open/write SIP registry cache.	%s = The SIP registry cache file. %s = The error that occurred when trying to open the SIP registry cache file.
Resolution: Review the associated error result. Check SIP registry cache file exists and is readable and writable.

SP-SP-10049
NOTICE

Application

INVITE Header: Name = '%s', Short = '%s', EDR (Req) = '%s', EDR (Rsp) = '%s'. Relay Req/Req = %s, Rsp/Rsp = %s, Rsp/Req = %s.

Cause: Parameter configuration at startup.
INVITE/re-INVITE Header log/relay configuration.

%s = The configured (re-)INVITE header name.
%s = The configured (re-)INVITE header short name.
%s = The configured (re-)INVITE Request header edr field name.
%s = The configured (re-)INVITE Response header edr field name.
%s = The configured (re-)INVITE header Request to Request flag.
%s = The configured (re-)INVITE header Response to Response flag.
%s = The configured (re-)INVITE header Response to Request flag.

Resolution: None.

SP-SP-10051
NOTICE

Application

Will listen for SIP TCP on '%s:%d'.

Cause: Parameter configuration at startup. SIP TCP bind configuration.	%s = The configured SIP bind host for TCP. %d = The configured SIP bind port for TCP.
Resolution: None.

SP-SP-10052
WARNING

Job

Cannot resolve Contact host '%s'. Unusable.

Cause: A Contact hostname being considered for outbound routing could not be resolved, and hence cannot be used for message delivery.	%s = The unresolveable host name.
Resolution: Check that domain name resolution is correctly configured.

SP-SP-10053
NOTICE

Application

TCP Persistent Link: Remote = %s:%d, Local = %s%s.

Cause: Parameter configuration at startup. SIP TCP link configuration.	%s = The remote host name/IP. %d = The remote port number. %s = The local host name/IP. %s = The local port number (if present).
Resolution: None.

SP-SP-10054
NOTICE

Application

TCP Link Reconnect Interval = %d (seconds).

Cause: Parameter configuration at startup. TCP Link Reconnection interval.	%d = The configured outbound reconnect interval for TCP Links (in seconds).
Resolution: None.

SP-SP-10055
NOTICE

Application

TCP Link Status Check Interval = %d (seconds).

Cause: Parameter configuration at startup. TCP Link Status check interval.	%d = The configured outbound status check interval for TCP Links (in seconds).
Resolution: None.

SP-SP-10056
NOTICE

Application

Suppress SIP port numbers in INVITE/REGISTER To URI and Request-URI = %s.

Cause: Parameter configuration at startup. Do we suppress non-standard peer port numbers in the To URI and Request-URI for INVITE and REGISTER Requests initiated by us towards a SIP Peer.	%s = The configured supression value.
Resolution: None.

SP-SP-10057
NOTICE

Application

TCP Link Status Type = %s.

Cause: Parameter configuration at startup. TCP Link Status check type.	%s = The configured outbound status check tyoe for TCP Links.
Resolution: None.

SP-SP-10058
WARNING

Configuration

Cannot resolve SIP Peer host '%s'. Unusable.

Cause: A configured SIP Peer hostname being considered for outbound routing could not be resolved, and hence cannot be used for message delivery.	%s = The unresolveable host name.
Resolution: Check that domain name resolution is correctly configured.

SP-SP-10059
NOTICE

Application

Suppress SIP user in OPTIONS To URI and Request-URI = %s.

Cause: Parameter configuration at startup. Do we suppress the user part in the To address URI and Request-URI for OPTIONS Requests initiated by us towards a SIP Peer.	%s = The configured supression value.
Resolution: None.

SP-SP-10060
NOTICE

Application

Log SIP ACK EDR = %s.

Cause: Parameter configuration at startup. EDR logging for SIP ACK configuration.	%s = The configured SIP ACK flag.
Resolution: None.

SP-SP-10061
NOTICE

Application

Ignore Contact and use inbound INVITE TCP connection for in-Dialog transactions = %s.

Cause: Parameter configuration at startup. Policy for re-using the inbound INVITE TCP connection for subsequent in-Dialog transactions.	%s = Do we allow inbound TCP to be used for in-dialog transactions (BYE, re-INVITE, ACK) even if it doesn't match the Contact?
Resolution: None.

SP-SP-10062
NOTICE

Application

SIP Peer TCP Connect setting = %s.

Cause: Parameter configuration at startup. Contact header construction.	%s = The configured default setting for TCP connect.
Resolution: None.

SP-SP-10064
NOTICE

Application

Trace SIP OPTIONS = %s.

Cause: Parameter configuration at startup. Tracing skipped for SIP OPTIONS (inbound and outbound)?	%s = The configured SIP ACK flag.
Resolution: None.

SP-SP-10065
NOTICE

Application

Trace SIP REGISTER = %s.

Cause: Parameter configuration at startup. Tracing skipped for SIP REGISTER (inbound and outbound)?	%s = The configured SIP ACK flag.
Resolution: None.

SP-SP-10066
NOTICE

Application

SIP B-Leg INVITE Request Header (Attempt-Number) = %s.

Cause: Parameter configuration at startup. Add a B-Leg "Attempt Sequence" header.	%s = The configured flag YES/NO if the "Attempt-Number" header will be added to B-Leg INVITE Request.
Resolution: None.

SP-SP-10067
NOTICE

Application

SIP B-Leg INVITE Request Header (A-Leg-Call-ID) = %s.

Cause: Parameter configuration at startup. Add a B-Leg "Attempt Sequence" header.	%s = The configured flag YES/NO if the "A-Leg-Call-ID" header will be added to B-Leg INVITE Request.
Resolution: None.

SP-SP-10068
NOTICE

Application

SIP Privacy INVITE RFC3325 support mode = %s.

Cause: Parameter configuration at startup. Indicate our SIP Privacy header support as per RFC 3325.	%s = The RFC3325 mode (trusted/untrusted).
Resolution: None.

SP-SP-10069
NOTICE

Application

Log SIP re-INVITE EDR = %s.

Cause: Parameter configuration at startup. EDR logging for SIP re-INVITE configuration.	%s = The configured SIP re-INVITE flag.
Resolution: None.

SP-SP-10070
NOTICE

Application

SIP Request Header (Instance-GID) = %s.

Cause: Parameter configuration at startup. Add an "Instance GID" header to SIP INVITE Requests.	%s = The configured flag YES/NO if the "Instance-GID" header will be added to INVITE Requests (either leg).
Resolution: None.

SP-SP-10071
NOTICE

Application

SIP Response Header (Instance-GID) = %s.

Cause: Parameter configuration at startup. Add an "Instance GID" header to SIP INVITE Responses.	%s = The configured flag YES/NO if the "Instance-GID" header will be added to INVITE Responses (either leg).
Resolution: None.

SP-SP-10072
NOTICE

Application

SIP P-Charging-Vector INVITE RFC3455 support mode = %s.

Cause: Parameter configuration at startup. Indicate our SIP P-Charging-Vector support as per RFC 3455.	%s = The RFC 3455 P-Charging-Vector mode (ignore/respect/assign).
Resolution: None.

SP-SP-10073
NOTICE

Application

SIP P-Charging-Vector INVITE RFC3455 support mode = %s.

Cause: Parameter configuration at startup. Indicate our SIP P-Charging-Vector support as per RFC 3455.	%s = The RFC 3455 P-Charging-Vector mode (ignore/respect/assign).
Resolution: None.

SP-SP-10702
WARNING

Configuration

Failed to resolve IP from SIP Peer Host '%s' unreachable.

Cause: Failed to resolve IP address from SIP Peer Host.	%s = The configured SIP Peer Host.
Resolution: Review SIP Peer configuration. Check the configured SIP Peer host is up and reachable.

N2::Application::SipApp::SipClientConnection

SP-SP-10701
ALARM

Connection

Lost [%s] %s %s Connection to SIP Peer [%s] (%s).

Cause: Persistent connection to SIP Peer has terminated.	%s = The error description for the failure reason. %s = The connection-layer binding (Server or Client). %s = The connection protocol (typically TCP). %s = The far-end SIP Peer ID. %s = Indicate if this connection was ever successfully readied.
Resolution: Check peer configuration and network routing.

SP-SP-10701
CLEAR

Connection

Sucessful SIP OPTIONS (login) for %s %s Connection to SIP Peer [%s].

Cause: Persistent connection to SIP Peer has logged-in successfully.	%s = The connection-layer binding (Server or Client). %s = The connection protocol (typically TCP). %s = The far-end SIP Peer ID.
Resolution: None.

N2::Application::SipApp::SipClientTxn

SP-SP-10301
WARNING

Message

Pending CANCEL request failed: %s

Cause: Pending CANCEL request failed.	%s = The error result generated when trying to perform the CANCEL.
Resolution: Review the associated error result.

SP-SP-10302
WARNING

Message

Pending CANCEL request failed: %s

Cause: Pending CANCEL request failed.	%s = The error result generated when trying to perform the CANCEL.
Resolution: Review the associated error result.

SP-SP-10308
WARNING

Internal

Unexpected timer %s fired in transaction state %s.

Cause: A transaction timer fired in an unexpected state.	%s = The state of the SIP client transaction. %s = The unexpected transaction timer reason.
Resolution: Contact N-Squared support.

N2::Application::SipApp::SipConnection

SP-SP-10401
WARNING

Message

Failed to send UAS response: %s

Cause: Failed to send SIP out-of-transaction Response.	%s = The reason why the SIP out-of-transaction Response could not be sent.
Resolution: Review the associated error result.

SP-SP-10402
WARNING

Message

SIP Server received new Transaction on terminated Dialog. Impossible!

Cause: Received new transaction on terminated dialog.	-
Resolution: Contact N-Squared support.

SP-SP-10403
WARNING

Message

[%s] SIP Server received new Transaction. No dialog. Instance already shutdown.

Cause: Received new SIP Transaction for an in-progress call with no dialog. This does not appear to be a valid scenario.	%s = The Call ID associated with the transaction.
Resolution: Review SIP message flow.

SP-SP-10404
WARNING

Message

SIP Transaction Key %s is in state '%s' and cannot be re-used. Discard Request with no handling.

Cause: SIP transaction key is in use, and cannot be re-used.	%s = The in use transaction key. %s = The current transaction key state.
Resolution: Contact N-Squared support.

SP-SP-10407
WARNING

Message

UDP SIP content nominal %d bytes > actual %d bytes.

Cause: SIP UDP content truncated.	%d = The received content length. %d = The actual content length of the received message.
Resolution: Check inbound message construction.

SP-SP-10409
WARNING

Message

Failed to parse received SIP UDP datagram: %s

Cause: Failed to decode SIP message from UDP datagram.	%s = The parsing error description.
Resolution: Check inbound message content construction.

SP-SP-10410
WARNING

Message

Dropping inbound SIP Request: %s

Cause: Failed to parse/process SIP Request. Request has been dumped.	%s = The reason why the SIP Response could not be parsed/processed.
Resolution: Check inbound message construction and fields.

SP-SP-10411
WARNING

Message

Dropping inbound SIP Response: %s

Cause: Failed to parse/process SIP Response. Response has been dumped.	%s = The reason why the SIP Response could not be parsed/processed.
Resolution: Check inbound message construction and fields.

SP-SP-10412
WARNING

Message

Failed to parse received SIP TCP stream: %s

Cause: Failed to decode SIP message from TCP stream.	%s = The parsing error description.
Resolution: Check inbound message content construction.

SP-SP-10413
WARNING

Message

Received PRACK with no RAck header. Send 400.

Cause: Received PRACK with no RAck header.	-
Resolution: Check inbound message construction.

SP-SP-10414
WARNING

Message

Received PRACK with empty or malformed RAck. Send 400.

Cause: Received PRACK with empty or malformed RAck.	-
Resolution: Check inbound message construction.

SP-SP-10415
WARNING

Message

Received PRACK for method '%s' != 'INVITE'. Send 400.

Cause: Received PRACK for non INVITE method.	%s = The inbound PRACK method.
Resolution: Check inbound message construction.

SP-SP-10416
WARNING

Message

Received PRACK for INVITE CSeq '%s' != expected '%s'. Send 481.

Cause: Received unexpected CSeq for PRACK.	%s = The received cseq number. %s = The expected cseq number.
Resolution: Check inbound message consturction.

SP-SP-10417
WARNING

Message

Received PRACK for INVITE RSeq #[%s] which was not sent (reliably) by us. Send 481.

Cause: Received PRACK for an dialog for an RSeq that we did not send.	%s = The unexpected RSeq number.
Resolution: Check inbound message consturction.

SP-SP-10419
WARNING

Message

Received PRACK for dialog without server INVITE/re-INVITE. Send 400.

Cause: Received PRACK but we did not use server INVITE/re-INVITE on this dialog.	-
Resolution: Check inbound message flow.

N2::Application::SipApp::SipDialog

SP-SP-10511
WARNING

Job

Dialog Terminated Twice. Impossible!

Cause: SIP dialog terminated twice.	-
Resolution: Contact N-Squared support.

SP-SP-10512
WARNING

Job

Dialog not registered at Termination time. Impossible!

Cause: SIP dialog not registered at termination time.	-
Resolution: Contact N-Squared support.

SP-SP-10513
WARNING

Job

Failed to BYE on Dialog in State %s. Terminate immediately.

Cause: Failed to send BTE on SIP dialog.	%s = The current SIP dialog state.
Resolution: Contact N-Squared support.

SP-SP-10514
WARNING

Job

Attempt to send INVITE 2XX for %s-Leg in unexpected Dialog State %s.

Cause: Attempt to send 2XX on an INVITE transaction for a Dialog in unexpected state.	%s = The relevant leg identifier 'A' or 'B'. %s = The current SIP dialog state.
Resolution: Review SIP call flow and network configuration.

N2::Application::SipApp::SipInstance

SP-SP-10101
WARNING

Internal

Call shutdown but RTP guard timer %s is still active. Impossible!

Cause: Call that supposedly ended cleanly is still running a timer for expected RTP activity.	%s = The name of the active RTP guard timer.
Resolution: Contact N-Squared Support.

SP-SP-10102
WARNING

Message

INFO dtmf-relay did not contain 'Signal'.

Cause: Inbound INFO dtmf-relay did not contain signal information.	-
Resolution: Check inbound message construction.

SP-SP-10103
WARNING

Message

INFO dtmf-relay 'Signal' = '%s' is not a single digit.

Cause: Inbound INFO dtmf-relay signal is not a single digit.	%s = The received signal configuration.
Resolution: Check inbound message construction.

SP-SP-10104
WARNING

Message

INFO dtmf-relay 'Signal' = '%s' received, but we are not playing RTP.

Cause: Inbound INFO dtmf-relay signal received but no worker process to play RTP.	%s = The received signal configuration.
Resolution: Contact N-Squared support.

SP-SP-10105
WARNING

Message

Worker send 'sip_dtmf' failed: %s

Cause: Failed to send sip_dtmf to worker process.	%s = The error result generated when trying to send the sip_dtmf to the worker process.
Resolution: Review the associated error result.

SP-SP-10106
WARNING

Internal

Received INFO was not handled, Content-Type = %s.

Cause: Received unsupported INFO operation that was not handled.	%s = The content type of the received INFO operation.
Resolution: Contact N-Squared support.

SP-SP-10108
WARNING

Internal

New RTP guard timer %s overwrites previous active RTP guard timer %s. Impossible.

Cause: A new RTP state machine guard timer was started while a previous one was still running.	%s = The defined timer action. %s = The existing RTP guard timer action.
Resolution: Contact N-Squared Support.

SP-SP-10109
WARNING

Internal

Request to cancel RTP guard timer %s but no RTP guard timer is active in RTP state %s. Impossible.

Cause: The internal RTP resource state machine attempt to cancel a RTP guard timer which is not currently running.	%s = The defined timer action. %s = The current RTP state.
Resolution: Contact N-Squared Support.

SP-SP-10110
WARNING

Internal

Request to cancel RTP guard timer %s but RTP guard timer %s is active instead in RTP state %s. Impossible.

Cause: Request to cancel RTP guard timer that does not match current RTP guard timer.	%s = The defined timer action. %s = The existing RTP guard timer action. %s = The current RTP state.
Resolution: Contact N-Squared Support.

SP-SP-10112
WARNING

Internal

Error using BYE for %s-Leg teardown: %s

Cause: Failed to tear down call with BYE.	%s = The leg name. %s = The reason for the BYE failure.
Resolution: Contact N-Squared Support.

SP-SP-10113
WARNING

Internal

Error using INVITE code %d for %s-Leg teardown: %s

Cause: Failed to tear down call with INVITE final code.	%d = The code attempted to be use. %s = The leg name. %s = The reason for the BYE failure.
Resolution: Contact N-Squared Support.

SP-SP-10114
WARNING

Internal

Error using CANCEL for %s-Leg teardown: %s

Cause: Failed to tear down call with CANCEL.	%s = The leg name. %s = The reason for the BYE failure.
Resolution: Contact N-Squared Support.

SP-SP-10115
WARNING

Message

Registration for '%s' has non-zero expires time, but no Contacts

Cause: Registration has non-zero expires time, but no Contacts.	%s = The affected registration PSTN address.
Resolution: Check inbound SIP message.

SP-SP-10116
WARNING

Message

Failed to parse SDP for repacking: %s

Cause: Attempted to repack received SDP but could not do so.	%s = The parsing failure reason.
Resolution: Check inbound SDP content.

N2::Application::SipApp::SipServerTxn

SP-SP-10201
WARNING

Message

Error handling %s access check: %s

Cause: Error handling method access check.	%s = The request method. %s = The method access error.
Resolution: Review the associated access error.

SP-SP-10202
WARNING

Message

Error handling %s access check: %s

Cause: Error handling method access check.	%s = The request method. %s = The method access error.
Resolution: Review the associated access error.

SP-SP-10203
WARNING

Job

Retransmission Timer for SIP INVITE 2XX Response expired without having received ACK in %s-Leg state %s.

Cause: Timeout waiting for ACK on sent SIP INVITE 2XX Response. We will used BYE to attempt to close the dialog.	%s = The relevant leg identifier 'A' or 'B'. %s = The current SIP dialog state.
Resolution: Review SIP call flow and network configuration.

SP-SP-10204
WARNING

Message

User logic did not handle INVITE result: %s

Cause: Failed to handle new INVITE.	%s = The error result generated when trying to handle the new INVITE.
Resolution: Review the associated error result.

SP-SP-10205
WARNING

Message

Failed to send %s transaction error (code %d): %s

Cause: Failed to send a 300-699 final Response.	%s = The transaction method. %d = The response code. %s = The error result generated when trying to send the response.
Resolution: Review the associated error result.

SP-SP-10206
WARNING

Message

SIP CANCEL Request is for unknown INVITE Transaction '%s'.

Cause: SIP cancel received for unknown invite transaction.	%s = The invite transaction key.
Resolution: Contact N-Squared support.

SP-SP-10207
NOTICE

Job

Service logic sent second reliable 1XX without waiting for PRACK on first reliable 1XX.

Cause: Service logic sent second reliable 1XX without waiting for PRACK on first reliable 1XX. This is not valid according to RFC 3272, 3 UAS Behavior.	-
Resolution: Review and adjust the service logic, particularly the use of 180 Ringing.

SP-SP-10209
WARNING

Message

Error sending %s 481: %s

Cause: Failed to send INFO 481.	%s = The request method. %s = The error result generated when trying to send the 481 message.
Resolution: Review the associated error result.

SP-SP-10212
WARNING

Message

Unsupported Method '%s' for new Transaction.

Cause: Unsupported method for new transaction.	%s = The unsupported request method.
Resolution: Ensure the inbound requested method is a valid supported method. Contact N-Squared support.

SP-SP-10213
WARNING

Job

Duplicate INVITE on this instance received in state '%s'. But we have no last response to re-transmit.

Cause: Duplicate INVITE received for instance, with no last response to retransmit.	%s = The current instance state.
Resolution: Contact N-Squared support.

SP-SP-10214
WARNING

Job

Duplicate INVITE on this instance received in state '%s'. Do not re-transmit response.

Cause: Duplicate INVITE received for instance, not retransmitting previous response.	%s = The current instance state.
Resolution: Contact N-Squared support.

SP-SP-10215
WARNING

Job

Duplicate %s on this instance received in state '%s'. But we have no last response to re-transmit.

Cause: Received duplicate request method for instance, with no last response to retransmit.	%s = The duplicate request method. %s = The current instance state.
Resolution: Contact N-Squared support.

SP-SP-10216
WARNING

Job

Duplicate %s on this instance received in state '%s'. Do not re-transmit response.

Cause: Received duplicate request method for instance, not retransmitting previous response.	%s = The duplicate request method. %s = The current instance state.
Resolution: Contact N-Squared support.

SP-SP-10217
WARNING

Message

Discarding unexpected ACK in INVITE State %s.

Cause: Discarding unexpected ACK in INVITE state.	%s = The current invite state.
Resolution: Contact N-Squared support.

SP-SP-10218
WARNING

Message

Timer %s fired without having received ACK in A-Leg state %s.

Cause: Timer fired without having received ACK.	%s = The named timer reason. %s = The current A-Leg state.
Resolution: Contact N-Squared support.

SP-SP-10219
WARNING

Internal

Redundant call to 'send_response' on %s SipServerTxn already in state %s

Cause: Redundant INVITE call to send_response.	%s = The transaction method. %s = The current SipServerTxn state.
Resolution: Contact N-Squared Support.

SP-SP-10220
WARNING

Internal

Redundant call to 'send_response' on %s SipServerTxn already in state %s

Cause: Redundant call to send_response.	%s = The transaction method. %s = The current SipServerTxn state.
Resolution: Contact N-Squared Support.

SP-SP-10221
WARNING

Internal

Redundant call to 'make_send_error_response' on %s SipServerTxn already in state %s

Cause: Redundant INVITE call to make_send_error_response.	%s = The transaction method. %s = The current SipServerTxn state.
Resolution: Contact N-Squared Support.

SP-SP-10222
WARNING

Internal

Redundant call to 'make_send_error_response' on %s SipServerTxn already in state %s

Cause: Redundant call to make_send_error_response.	%s = The transaction method. %s = The current SipServerTxn state.
Resolution: Contact N-Squared Support.

SP-SP-10223
WARNING

Internal

Unexpected timer %s fired in transaction state %s.

Cause: A transaction timer fired in an unexpected state.	%s = The state of the SIP server transaction. %s = The unexpected transaction timer reason.
Resolution: Contact N-Squared Support.

SP-SP-10224
WARNING

Internal

Redundant call to 'make_send_ok_response' on %s SipServerTxn already in state %s

Cause: Redundant INVITE call to make_send_ok_response.	%s = The transaction method. %s = The current SipServerTxn state.
Resolution: Contact N-Squared Support.

SP-SP-10225
WARNING

Internal

Redundant call to 'make_send_ok_response' on %s SipServerTxn already in state %s

Cause: Redundant call to make_send_ok_response.	%s = The transaction method. %s = The current SipServerTxn state.
Resolution: Contact N-Squared Support.

SP-SP-10226
WARNING

Message

Failed to send %s transaction error (code %d): %s

Cause: Failed to send a 2XX final Response.	%s = The transaction method. %d = The response code. %s = The error result generated when trying to send the response.
Resolution: Review the associated error result.

SP-SP-10227
WARNING

Message

OPTIONS message Require header options '%s' are not supported.

Cause: Require options are not supported for OPTIONS messages.	%s = The Require header value.
Resolution: Ensure OPTIONS messages don't have Require headers.

SP-SP-10228
WARNING

Message

Cause: Require header options are not supported for REGISTER messages.	%s = The Require header value.
Resolution: Ensure REGISTER messages don't have Require headers.

SP-SP-10229
WARNING

Message

Cause: REGISTER message From header URI differs from the To header URI.	%s = The From header's URI. %s = The To header's URI.
Resolution: Ensure the From header URI matches the To header URI for REGISTER messages.

SP-SP-10230
WARNING

Message

Cause: REGISTER message is missing a Contact header.	-
Resolution: Ensure REGISTER messages have a Contact header.

SP-SP-10231
WARNING

Message

Error handling REGISTER message: %s

Cause: Failed to handle REGISTER message.	%s = The error message.
Resolution: Review the associated error message.

SP-SP-10232
WARNING

Message

INVITE message has Require header with option 100rel, but PRACK is disabled

Cause: INVITE message Require header contains option "100rel". Support for 100rel/PRACK is disabled.	-
Resolution: Ensure the Require header does not contain the 100rel option for INVITE messages, or modify the "inbound_prack_policy" setting value.

SP-SP-10233
WARNING

Message

INVITE message Require header option '%s' is not supported.

Cause: INVITE message Require header contains an unsupported option.	%s = The unsupported Require header option.
Resolution: Remove the unsupported Require header option from INVITE messages.

SP-SP-10234
WARNING

Message

Dialog rejected re-INVITE message: %s

Cause: Dialog rejected re-INVITE message.	%s = The error message.
Resolution: Contact N-Squared support.

SP-SP-10235
WARNING

Message

Error handling re-INVITE message: %s

Cause: Failed to handle re-INVITE message.	%s = The error message.
Resolution: Contact N-Squared support.

SP-SP-10236
WARNING

Message

INVITE message From header '%s' is missing a remote tag.

Cause: INVITE message From header is missing a remote tag.	%s = The From header value.
Resolution: Ensure the From header contains a remote tag for INVITE messages.

SP-SP-10237
WARNING

Message

INVITE message missing Contact header.

Cause: INVITE message is missing a Contact header.	-
Resolution: Ensure INVITE messages have a Contact header.

SP-SP-10238
WARNING

Message

INVITE message with content must have a Content-Type header.

Cause: INVITE message with content is missing a Content-Type header.	-
Resolution: Ensure INVITE messages that have content also have a Content-Type header.

SP-SP-10239
WARNING

Message

INVITE message Content-Type header value '%s' is not supported.

Cause: INVITE message Content-Type header value is not supported.	%s = The unsupported Content-Type header value.
Resolution: Contact N-Squared support.

SP-SP-10240
WARNING

Message

INVITE message with Content-Type header value '%s' must have content.

Cause: INVITE message Content-Type header implies content the message should have content, but the message doesn't have content.	%s = The Content-Type header value.
Resolution: Contact N-Squared support.

SP-SP-10241
WARNING

Message

CANCEL message Require header options '%s' are not supported.

Cause: Require header options are not supported for CANCEL messages.	%s = The Require header value.
Resolution: Ensure CANCEL messages don't have Require headers.

SP-SP-10242
WARNING

Message

BYE message Require header options '%s' are not supported.

Cause: Require header options are not supported for BYE messages.	%s = The Require header value.
Resolution: Ensure BYE messages don't have Require headers.

SP-SP-10243
WARNING

Message

INFO message Require header options '%s' are not supported.

Cause: Require header options are not supported for INFO messages.	%s = The Require header value.
Resolution: Ensure INFO messages don't have Require headers.

SP-SP-10244
WARNING

Message

Error handling INFO message: %s

Cause: Failed to handle INFO message.	%s = The error message.
Resolution: Contact N-Squared support.

N2::Application::SipApp::SipTxn

SP-SP-10601
WARNING

Internal

SIP Transaction Key '%s' Terminated but not Completed.

Cause: SIP transaction key terminated but not completed.	%s = The SIP transaction key.
Resolution: Contact N-Squared support.

SP-SP-10602
WARNING

Internal

SIP Transaction Key '%s' Terminated Twice.

Cause: SIP transaction key terminated twice.	%s = The SIP transaction key.
Resolution: Contact N-Squared support.

SP-SP-10603
WARNING

Internal

SIP Transaction Key '%s' not registered at Termination time.

Cause: SIP transaction key not registered at termination time.	%s = The SIP transaction key.
Resolution: Contact N-Squared support.

SP-SP-10604
WARNING

Internal

Attempt to start new state timer %s, but is already running.

Cause: Attempt to start a transaction state timer that is already running.	%s = The transaction state timer we are starting.
Resolution: Contact N-Squared Support.

SP-SP-10605
WARNING

Internal

Attempt to cancel transaction state timer %s, but it was not running.

Cause: Attempt to cancel a Transaction timer that was not running.	%s = The transaction timer name which should have been running.
Resolution: Contact N-Squared Support.

N2::Application::TcapApp

SV-TC-10101
WARNING

Internal

Discarding %s message without (|) context.

Cause: Received message that did not contain either an instance or transaction context.	%s = The received message.
Resolution: Contact N-Squared support.

SV-TC-10102
WARNING

Message

Failed to send TCAP-TXNCHECK-RESPONSE notification: %s

Cause: Failed to send TCAP transaction check response notification.	%s = The error result generated when trying to send the notification.
Resolution: Review the associated error result.

SV-TC-10103
WARNING

Message

Discarding %s message for expired instance_idx|transaction = '%s', TID %s.

Cause: Received message for expired instance_idx or transaction. Message discarded.	%s = The received message. %s = The instance/transaction context. %s = The local TID.
Resolution: Review the inbound message order and content construction.

SV-TC-10104
WARNING

Internal

Received TCAP-TXNCHECK-REQUEST for unknown transaction %s.

Cause: Received TCAP transaction check request for unknown transaction.	%s = The received message transaction.
Resolution: Contact N-Squared support.

SV-TC-10105
WARNING

Message

Failed to send TCAP-TXNCHECK-RESPONSE for transaction %s: %s

Cause: Failed to send TCAP transaction check response for transaction.	%s = The failing transaction. %s = The error result generated when trying to send the response.
Resolution: Review the associated error result.

SV-TC-10106
WARNING

Message

Discarding %s message without type.

Cause: Received message without message type. Message discarded.	%s = The received message.
Resolution: Check inbound message content construction.

SV-TC-10107
WARNING

Message

Discarding '%s' (%s) message without (local_tid) sender_context.

Cause: Received message without send context. Message discarded.	%s = The received message. %s = The message type.
Resolution: Check inbound message content construction.

SV-TC-10108
WARNING

Message

Discarding associated TCAP_BEGIN for unknown instance_idx|transaction = '%s', New TID %s.

Cause: Received associated TCAP begin for unknown instance.	%s = The message context. %s = The associated local TID.
Resolution: Check network is delivering messages in good time without replay.

SV-TC-10109
WARNING

Job

Aborting/discarding second TCAP_BEGIN for already-associated transaction = '%s'.

Cause: Received a second TCAP_BEGIN for an already-open transaction.	%s = The transaction key.
Resolution: Check network is delivering messages in good time without replay.

SV-TC-10110
WARNING

Message

Discarding (initial) TCAP_BEGIN sent %.1f seconds ago.

Cause: Received TCAP begin that exceeded the maximum expiry seconds. TCAP begin discarded.	%.1f = The amount of seconds since the TCAP begin was sent.
Resolution: Review associated expiry seconds. Ensure downstream Sigtran components are still available and processing requests.

SV-TC-10111
WARNING

Message

Aborting (initial) TCAP_BEGIN rejected by Application: %s

Cause: TCAP begin rejected.	%s = The error result generated by the application that reject the TCAP begin.
Resolution: Review the associated error result.

SV-TC-10112
WARNING

Message

Discarding '%s' (%s) message without (instance_idx|transaction) context.

Cause: Received message without instance/transaction context. Message discarded.	%s = The received message. %s = The message type.
Resolution: Review message content construction.

SV-TC-10113
WARNING

Message

Discarding '%s' (%s) message without (local_tid) sender_context.

Cause: Received message without sender context. Message discarded.	%s = The received message. %s = The message type.
Resolution: Review message content construction.

SV-TC-10114
WARNING

Message

Discarding '%s' (%s) message for unknown/expired instance %s.

Cause: Received message for unknown/expired instance. Message discarded.	%s = The received message. %s = The message type. %s = The instance context.
Resolution: Review message content construction.

SV-TC-10115
WARNING

Message

Discarding '%s' (%s) message for unknown transaction %s on instance %s.

Cause: Received message for unknown instance transaction. Message discarded.	%s = The received message. %s = The message type. %s = The instance transaction. %s = The instance context.
Resolution: Review message content construction.

SV-TC-10116
WARNING

Message

Discarding '%s' (%s) unsupported TCAP type.

Cause: Received unsupported TCAP type.	%s = The received message. %s = The message type.
Resolution: Review the requested TCAP type. Review the message content construction. Contact N-Squared support.

SV-TC-10117
WARNING

Message

Discarded unrecognised component element.

Cause: Unsupported component element. Component discarded.	-
Resolution: Check component element is valid.

N2::Application::TcapApp::TcapInstance

SV-TC-10130
WARNING

Message

Invalid components for TCAP SEND: %s

Cause: Attempt to send invalid component structure.	%s = Component reference type.
Resolution: Contact N-Squared support.

SV-TC-10202
WARNING

Internal

Attempt to close unknown transaction %s.

Cause: Attempted to close unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10203
WARNING

Internal

Double close on transaction %s - %s after %s.

Cause: Attempted to close transaction that is already closed.	%s = The transaction. %s = The reason generated when trying to perform a duplicate close. %s = The reason generated when originally closing the transaction.
Resolution: Contact N-Squared support.

SV-TC-10204
WARNING

Internal

Close attempt on half-open transaction %s.

Cause: Attempted to close half open transaction.	%s = The open transaction.
Resolution: Contact N-Squared support.

SV-TC-10205
WARNING

Internal

Attempt to abandon unknown transaction %s.

Cause: Attempt to abandon unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10206
WARNING

Internal

Double close/abandon on transaction %s - %s after %s.

Cause: Attempt to abandon transaction that was already either closed or abandoned.	%s = The transaction. %s = The close method. %s = The close reason associated with the previous transaction close.
Resolution: Contact N-Squared support.

SV-TC-10207
WARNING

Internal

Abandon attempt on fully-open transaction %s.

Cause: Attempted to call abandon on fully open transaction.	%s = The open transaction.
Resolution: Contact N-Squared support.

SV-TC-10208
WARNING

Internal

Attempt to set AC on unknown transaction %s.

Cause: Attempt to set application context on unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10209
WARNING

Internal

Attempt to set result on unknown transaction %s.

Cause: Attempt to set result dialogue parameters on unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10210
WARNING

Internal

Attempt to get AC on unknown transaction %s.

Cause: Attempt to get application context from unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10211
WARNING

Internal

Attempt to get AARE dialogue result on unknown transaction %s.

Cause: Attempt to get application context from unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10212
WARNING

Internal

Overloading OUTBOUND Transaction '%s' Local TID '%s' is lost!

Cause: Duplicate initialise method call on existing local TID.	%s = The transaction. %s = The local TID that has been lost.
Resolution: Contact N-Squared support.

SV-TC-10213
WARNING

Internal

Failed pre-arranged end on open transaction %s: %s

Cause: Failed to perform pre-arranged end on open transaction.	%s = The open transaction. %s = The result generated when trying to perform a pre-arranged end on an open transaction.
Resolution: Contact N-Squared support.

SV-TC-10214
WARNING

Internal

Attempt to create invoke component for unknown transaction %s.

Cause: Attempt to invoke unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10215
WARNING

Internal

Attempt to get last sent opcode for unknown transaction %s.

Cause: Attempt to get last sent opcode for unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10216
WARNING

Internal

Attempt to get last received invoke id for unknown transaction %s.

Cause: Attempt to get last received invoke ID for unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10217
WARNING

Message

Failed to ABORT TCAP Transaction '%s' at shutdown with Local TID = '%s': %s

Cause: Failed to abort TCAP transaction at application shutdown.	%s = The transaction. %s = The transaction local TID. %s = The result generated when trying to abort the TCAP transaction.
Resolution: Check network connectivity.

SV-TC-10218
WARNING

Job

Failed to ABORT TCAP Transaction '%s' at shutdown with Local TID = '%s': %s

Cause: Failed to abort TCAP transaction at instance shutdown.	%s = The transaction. %s = The transaction local TID. %s = The result message generated when trying to send the abort.
Resolution: Review the associated error result.

SV-TC-10219
WARNING

Internal

Attempt to get remote SCCP on unknown transaction %s.

Cause: Attempt to get remote SCCP address from unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10220
WARNING

Internal

Attempt to get TIDs on unknown transaction %s.

Cause: Attempt to get TIDs from unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

SV-TC-10221
WARNING

Internal

Attempt to get local SCCP on unknown transaction %s.

Cause: Attempt to get local SCCP address from unknown transaction.	%s = The unknown transaction.
Resolution: Contact N-Squared support.

N2::Match

SV-MA-10000
WARNING

Configuration

match_value: Split of undefined or non-scalar '%s' element.

Cause: Split of undefined or non scalar element.	%s = The element type.
Resolution: Review the associated non-scalar element type. Check inbound element content construction.

SV-MA-10001
WARNING

Configuration

match_value: Index. Non-ARRAY '%s' at '%s' in '%s' (Index %d). Abandon.

Cause: Index non array.	%s = The element part. %s = The unexpected value type. %s = The element key. %d = The element array index.
Resolution: Review the associated error message. Check inbound element content construction.

SV-MA-10002
WARNING

Configuration

match_value: Filter. Non-ARRAY, Non-Hash at '%s' in '%s'. Abandon.

Cause: Filter non-array or hash.	%s = The element part. %s = The element key.
Resolution: Review the associated error message. Check inbound element content construction.

SV-MA-10003
WARNING

Configuration

match_value: Expecting HASH. Found single-entry ARRAY but it contains a %s, not a HASH.

Cause: Expected hash but got single entry array with non hash value.	%s = The element type.
Resolution: Review the associated error message. Check inbound element content construction.

SV-MA-10004
WARNING

Configuration

match_value: non-HASH at '%s' in '%s'. Abandon.

Cause: Non hash value.	%s = The element part. %s = The element key.
Resolution: Review the associated error message. Check inbound element content construction.

SV-MA-10005
WARNING

Configuration

match1s_regex: Invalid RegEx pattern /%s/: %s

Cause: Invalid regular expression pattern.	%s = The expected regular expression pattern. %s = The error encountered.
Resolution: Review the associated error result. Check inbound regular expression construction is valid.

N2::SVCD::Stats

SV-SD-10000
NOTICE

Application

Enabling 'statsd' notification to host %s:%d. Prefix = '%s'.

Cause: Parameter configuration at startup. Statsd statistics output enabled.	%s = The statsd host. %d = The statsd port. %s = The statsd prefix.
Resolution: None.

N2::TCP::ClientConnection

SV-TP-10100
WARNING

Application

SSL is not supported on '%s' connections. Ignored.

Cause: SSL is enabled. SSL is not supported for the current TCP protocol.	%s = The configured TCP protocol.
Resolution: Check application SSL and TCP protocol configuration.

SV-TP-10101
WARNING

Socket

Failed to create %s client socket: %s

Cause: Failed to create protocol socket.	%s = The socket protocol. %s = The error that occurred when trying to create to the socket.
Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports creating TCP sockets.

SV-TP-10102
WARNING

Connection

Cannot set (new outbound) socket attributes: %s

Cause: Failed to set (new outbound) socket attributes.	%s = Description of the reason for failure, including the attribute type which could not be set.
Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports getting socket flags.

SV-TP-10103
WARNING

Socket

Failed to bind %s socket to '%s:%d': %s

Cause: Failed to bind to local socket.	%s = The configured TCP protocol. %s = The configured local host. %d = The configured local port. %s = The error that occurred when trying to bind to the local socket.
Resolution: Review the associated error result. Check local bind configuration. Check the host machine supports creating sockets.

SV-TP-10104
WARNING

Application

Error resolving remote host '%s': %s

Cause: Unable to determine remote host.	%s = The configured remote host. %s = The error that occurred when trying to bind to the remote host.
Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections.

SV-TP-10105
WARNING

Connection

Error connecting to remote host %s:%d: %s

Cause: Failed to connect to remote host.	%s = The configured remote host. %d = The configured remote port. %s = The error that occurred when trying to connect to the remote host.
Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections.

SV-TP-10106
WARNING

Connection.

Connection error [%s:%d]: %s

Cause: Connection error.	%s = The remote host. %d = The remote port. %s = The error that occurred when trying to connect to the remote host.,
Resolution: Review the associated error message. Check client connection configuration. Check remote host is up and accessible.

SV-TP-10107
WARNING

Connection

Connection error flagged: %s

Cause: Socket error when connecting to remote end.	%s = The socket error that occurred when trying to connect to the remote application,
Resolution: Review the associated error result. Check remote host is up and accepting connections.

SV-TP-10108
WARNING

Socket

Outbound connection SSL setup error: %s

Cause: Failed to convert outbound raw socket into Net::SSL context.	%s = The error that occurred when trying to convert socket to SSL.
Resolution: Review the associated error result. Check SSL configuration.

N2::TCP::Connection

SV-TP-10500
WARNING

Message

UDP Datagram sent only %d of %d bytes. Datagram was truncated.

Cause: Mis-formed UDP datagram detected.	%d = The number of bytes that were written via UDP. %d = The total number of bytes that makes up the message.
Resolution: Review the message content construction. Inspect the UDP datagram payload.

SV-TP-10501
WARNING

Connection

Error calling recv: %s

Cause: Failed to receive on connection.	%s = The error that occurred when trying to read from the connection.
Resolution: Review the associated error result.

SV-TP-10502
WARNING

Connection

Error calling send: %s

Cause: Failed to send on connection.	%s = The error that occurred when trying to write to the connection.
Resolution: Review the associated error result.

N2::TCP::Server

SV-TP-11000
NOTICE

Connection

Creating UDP connection for %s:%d.

Cause: Application startup. Creating single UDP connection.	%s = The local host. %d = The local port.
Resolution: None.

SV-TP-11003
WARNING

Connection

Failed to get '%s' socket.

Cause: Failed to get socket.	%s = The configured protocol name.
Resolution: Review TCP socket configuration. Check the host machine is capable of creating the request UNIX socket protocol.

SV-TP-11004
WARNING

Connection

Cannot get flags from socket: %s

Cause: Unable to determine socket supported flags.	%s = The error result when trying to parse the socket flags.
Resolution: Review the associated error result. Check TCP socket configuration. Check the host machine supports getting socket flags.

SV-TP-11005
WARNING

Connection

Cannot set non-Blocking on socket: %s

Cause: Unable to set socket as non blocking.	%s = The error result when trying to set the socket as non blocking.
Resolution: Review the associated error result. Check TCP socket configuration. Check the host machine supports creating non blocking sockets.

SV-TP-11006
WARNING

Connection

Bind %s socket to %s:%d failed with error: %s

Cause: Failed to bind socket to host.	%s = The socket protocol name. %s = The local host. %d = The local port. %s = The error result when trying to parse the socket flags.
Resolution: Review the associated error result. Check the host bind configuration. Check the host machine supports creating sockets.

SV-TP-11007
WARNING

Connection

Failed to listen on bound TCP socket: %s

Cause: Failed to listen on TCP socket.	%s = The error result when trying listen on TCP socket.
Resolution: Review the associated error result. Check the TCP socket configuration.

SV-TP-11009
WARNING

Connection

Error accepting connection: %s

Cause: Failed to accept inbound connection.	%s = The error result when trying to accept inbound connection.
Resolution: Review the associated error result.

SV-TP-11010
WARNING

Connection

Error processing new connection: %s

Cause: Failed to process new inbound connection.	%s = The error result when trying to accept inbound connection.
Resolution: Review the associated error result.

N2::TCP::ServerConnection

SV-TP-10400
WARNING

Application

SSL is not supported on '%s' connections. Ignored.

Cause: SSL is not supported on non-TCP protocol (e.g. UDP).	%s = The configured connection protocol.
Resolution: Check application protocol and SSL configuration.

N2::Trace

SV-AP-10065
WARNING

Application

Suppressed a total of %d duplicate warnings [%s].

Cause: The same warning ID was logged too many times in a fixed interval.	%d = The number of warnings that were suppressed. %s = The event ID of the suppressed warnings.
Resolution: Address the underlying problem which caused the warnings.

Statistics

The following 36 statistics may be generated by N2SIP Application “LhoSipApp”.

No statistics found that match search criteria.

N2::Application

instance.throttle.max_instances

Message

Counter

Cause:

Maximum number of instances exceeding the max number of instances.

instance.throttle.max_tps_average

Message

Counter

Cause:

Average max TPS for the last throttle period.

N2::Application::AppInstance

instance.abort

Job, Message

Counter

Cause:

Application instances aborted due to receiving an unexpected shutdown/abort message. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. Note that aborted instances are still counted in instance.shutdown.

instance.shutdown

Job, Message

Counter

Cause:

Application instances shut down (for any reason, including abort). Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. The difference between this statistic and instance.start represents the current number of active instances being handled by this application.

instance.start

Job, Message

Counter

Cause:

Application instances started. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. The difference between this statistic and instance.shutdown represents the current number of active instances being handled by this application.

N2::Application::SipApp::SipConnection

instance.aborted.no_via

Message

Counter

Cause:

SIP requests received without a Via header.

message.bad.bad_cseq

Message

Counter

Cause:

SIP requests received with an unsupported CSeq header.

message.bad.bad_protocol

Message

Counter

Cause:

SIP requests received with an unsupported transport protocol.

message.bad.no_call_id

Message

Counter

Cause:

SIP requests received without a call ID header.

message.bad.no_from

Message

Counter

Cause:

SIP requests received without a From header.

message.bad.no_method

Message

Counter

Cause:

Messages received with no request method.

message.bad.no_to

Message

Counter

Cause:

SIP requests received without a To header.

message.bad.no_uri

Message

Counter

Cause:

SIP requests received without a URI.

message.tcp.bad.no_decode

Message

Counter

Cause:

SIP TCP messages received that could be decoded.

message.udp.bad.no_decode

Message

Counter

Cause:

SIP UDP messages received that could be decoded.

request.discarded.no_via_branch

Message

Counter

Cause:

SIP requests received without a Via branch.

request.discarded.via_branch_unsupported

Message

Counter

Cause:

SIP requests received without an unsupported Via branch.

requests.ack

Message

Counter

Cause:

SIP ACK requests received.

requests.bye

Message

Counter

Cause:

SIP BYE requests received.

requests.cancel

Message

Counter

Cause:

SIP CANCEL requests received.

requests.invite

Message

Counter

Cause:

SIP INVITE requests received.

requests.options

Message

Counter

Cause:

SIP OPTIONS requests received.

requests.prack

Message

Counter

Cause:

SIP PRACK requests received.

requests.register

Message

Counter

Cause:

SIP REGISTER requests received.

requests.unsupported

Message

Counter

Cause:

Unsupported SIP request methods received.

response.discarded.bad_cseq

Message

Counter

Cause:

SIP responses received with an unsupported CSeq header.

response.discarded.no_call_id

Message

Counter

Cause:

SIP responses received without a call ID header.

response.discarded.no_code

Message

Counter

Cause:

SIP responses received without a status code.

response.discarded.no_cseq

Message

Counter

Cause:

SIP responses received without a CSeq header.

response.discarded.no_from

Message

Counter

Cause:

SIP responses received without a From header.

response.discarded.no_message

Message

Counter

Cause:

SIP responses received without a reason.

response.discarded.no_to

Message

Counter

Cause:

SIP responses received without a To header.

response.discarded.no_via

Message

Counter

Cause:

SIP responses received with no Via header.

response.discarded.no_via_branch

Message

Counter

Cause:

SIP responses received without a Via header.

response.discarded.via_branch_unsupported

Message

Counter

Cause:

SIP responses received without an unsupported Via branch.

response.refused.no_cseq

Message

Counter

Cause:

SIP requests received without a Cseq header.