TestSipUdpLuaAgent
Alarms
The following 27 alarms may be generated by N2SIP Agent “TestSipUdpLuaAgent”.
Show:
Alarm
Warning
Clear
Notice
No alarms found that match search criteria.
N2::Application::LuaApp::LuaAgent
| SV-LU-10024 NOTICE | Application | Default App Name for '%s' and '%s.*' requests is '%s'. |
| Cause: Parameter configuration at startup. Default configured application name for agent key. |
%s = The triggering agent key. %s = The triggering agent key and all associated wildcards. %s = The default application name. |
| Resolution: None. |
| SV-LU-10025 NOTICE | Application | Routed App Name for '%s.%s' requests is '%s'. |
| Cause: Parameter configuration at startup. Configured application route for agent key. |
%s = The triggering agent key. %s = The configured route. %s = The configured application name. |
| Resolution: None. |
N2::Application::SipApp::SipTxn
| SP-SP-10601 WARNING | Internal | SIP Transaction Key '%s' Terminated but not Completed. |
| Cause: SIP transaction key terminated but not completed. |
%s = The SIP transaction key. |
| Resolution: Contact N-Squared support. |
| SP-SP-10602 WARNING | Internal | SIP Transaction Key '%s' Terminated Twice. |
| Cause: SIP transaction key terminated twice. |
%s = The SIP transaction key. |
| Resolution: Contact N-Squared support. |
| SP-SP-10603 WARNING | Internal | SIP Transaction Key '%s' not registered at Termination time. |
| Cause: SIP transaction key not registered at termination time. |
%s = The SIP transaction key. |
| Resolution: Contact N-Squared support. |
| SP-SP-10604 WARNING | Internal | Attempt to start new state timer %s, but is already running. |
| Cause: Attempt to start a transaction state timer that is already running. |
%s = The transaction state timer we are starting. |
| Resolution: Contact N-Squared Support. |
| SP-SP-10605 WARNING | Internal | Attempt to cancel transaction state timer %s, but it was not running. |
| Cause: Attempt to cancel a Transaction timer that was not running. |
%s = The transaction timer name which should have been running. |
| Resolution: Contact N-Squared Support. |
N2::Match
| SV-MA-10000 WARNING | Configuration | match_value: Split of undefined or non-scalar '%s' element. |
| Cause: Split of undefined or non scalar element. |
%s = The element type. |
| Resolution: Review the associated non-scalar element type. Check inbound element content construction. |
| SV-MA-10001 WARNING | Configuration | match_value: Index. Non-ARRAY '%s' at '%s' in '%s' (Index %d). Abandon. |
| Cause: Index non array. |
%s = The element part. %s = The unexpected value type. %s = The element key. %d = The element array index. |
| Resolution: Review the associated error message. Check inbound element content construction. |
| SV-MA-10002 WARNING | Configuration | match_value: Filter. Non-ARRAY, Non-Hash at '%s' in '%s'. Abandon. |
| Cause: Filter non-array or hash. |
%s = The element part. %s = The element key. |
| Resolution: Review the associated error message. Check inbound element content construction. |
| SV-MA-10003 WARNING | Configuration | match_value: Expecting HASH. Found single-entry ARRAY but it contains a %s, not a HASH. |
| Cause: Expected hash but got single entry array with non hash value. |
%s = The element type. |
| Resolution: Review the associated error message. Check inbound element content construction. |
| SV-MA-10004 WARNING | Configuration | match_value: non-HASH at '%s' in '%s'. Abandon. |
| Cause: Non hash value. |
%s = The element part. %s = The element key. |
| Resolution: Review the associated error message. Check inbound element content construction. |
| SV-MA-10005 WARNING | Configuration | match1s_regex: Invalid RegEx pattern /%s/: %s |
| Cause: Invalid regular expression pattern. |
%s = The expected regular expression pattern. %s = The error encountered. |
| Resolution: Review the associated error result. Check inbound regular expression construction is valid. |
N2::TCP::ClientConnection
| SV-TP-10100 WARNING | Application | SSL is not supported on '%s' connections. Ignored. |
| Cause: SSL is enabled. SSL is not supported for the current TCP protocol. |
%s = The configured TCP protocol. |
| Resolution: Check application SSL and TCP protocol configuration. |
| SV-TP-10101 WARNING | Socket | Failed to create %s client socket: %s |
| Cause: Failed to create protocol socket. |
%s = The socket protocol. %s = The error that occurred when trying to create to the socket. |
| Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports creating TCP sockets. |
| SV-TP-10102 WARNING | Connection | Cannot set (new outbound) socket attributes: %s |
| Cause: Failed to set (new outbound) socket attributes. |
%s = Description of the reason for failure, including the attribute type which could not be set. |
| Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports getting socket flags. |
| SV-TP-10103 WARNING | Socket | Failed to bind %s socket to '%s:%d': %s |
| Cause: Failed to bind to local socket. |
%s = The configured TCP protocol. %s = The configured local host. %d = The configured local port. %s = The error that occurred when trying to bind to the local socket. |
| Resolution: Review the associated error result. Check local bind configuration. Check the host machine supports creating sockets. |
| SV-TP-10104 WARNING | Application | Error resolving remote host '%s': %s |
| Cause: Unable to determine remote host. |
%s = The configured remote host. %s = The error that occurred when trying to bind to the remote host. |
| Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections. |
| SV-TP-10105 WARNING | Connection | Error connecting to remote host %s:%d: %s |
| Cause: Failed to connect to remote host. |
%s = The configured remote host. %d = The configured remote port. %s = The error that occurred when trying to connect to the remote host. |
| Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections. |
| SV-TP-10106 WARNING | Connection. | Connection error [%s:%d]: %s |
| Cause: Connection error. |
%s = The remote host. %d = The remote port. %s = The error that occurred when trying to connect to the remote host., |
| Resolution: Review the associated error message. Check client connection configuration. Check remote host is up and accessible. |
| SV-TP-10107 WARNING | Connection | Connection error flagged: %s |
| Cause: Socket error when connecting to remote end. |
%s = The socket error that occurred when trying to connect to the remote application, |
| Resolution: Review the associated error result. Check remote host is up and accepting connections. |
| SV-TP-10108 WARNING | Socket | Outbound connection SSL setup error: %s |
| Cause: Failed to convert outbound raw socket into Net::SSL context. |
%s = The error that occurred when trying to convert socket to SSL. |
| Resolution: Review the associated error result. Check SSL configuration. |
N2::TCP::Connection
| SV-TP-10500 WARNING | Message | UDP Datagram sent only %d of %d bytes. Datagram was truncated. |
| Cause: Mis-formed UDP datagram detected. |
%d = The number of bytes that were written via UDP. %d = The total number of bytes that makes up the message. |
| Resolution: Review the message content construction. Inspect the UDP datagram payload. |
| SV-TP-10501 WARNING | Connection | Error calling recv: %s |
| Cause: Failed to receive on connection. |
%s = The error that occurred when trying to read from the connection. |
| Resolution: Review the associated error result. |
| SV-TP-10502 WARNING | Connection | Error calling send: %s |
| Cause: Failed to send on connection. |
%s = The error that occurred when trying to write to the connection. |
| Resolution: Review the associated error result. |
N2::Trace
| SV-AP-10065 WARNING | Application | Suppressed a total of %d duplicate warnings [%s]. |
| Cause: The same warning ID was logged too many times in a fixed interval. |
%d = The number of warnings that were suppressed. %s = The event ID of the suppressed warnings. |
| Resolution: Address the underlying problem which caused the warnings. |
TestSipUdpApp::TestSipUdpLuaAgent
| SP-SI-10101 NOTICE | Job | SIP call ID '%s' still has %d remaining unprocessed inbound packets at end of processing. |
| Cause: Unhandled UDP packets remaining at the end of the Agent lifetime. |
%s = The call ID for which packets remain. %d = The number of remaining packets. |
| Resolution: Check that this is an expected side-effect of the test case. |