INAP Op - InitialDP - IN Tester

INAP Operation - InitialDP

The InitialDP operation represents the sending of an INAP InitialDP.

This message is sent by the IN Tester when it is simulating the role of a Service Switching Platform (SSP).

Direction: OUTBOUND
From: SSP (IN Tester)
To: SCP (Application Under Test)

Attributes

The operation attributes are as follows.

Attribute	Type	Description
`type`	String	`inap.ssp_to_scp.InitialDP`
`label`	String	An optional label for this node if it is to be the target of a `branch` operation.
`send_with_next`	Boolean	Request that this INAP operation should be bundled with the next outbound TCAP. (Default = false).
`send_and_close`	Boolean	Request that this INAP operation should be sent as TCAP END. (Default = false).
`arguments`	Object	[Required] The structure of the INAP InitialDPArg to construct and send. Expressions may be supplied within this structure.

Example

This is an example entry within the operations array:

{
  "type": "inap.ssp_to_scp.InitialDP",
  "arguments": {
    "serviceKey": "341",
    "callingPartyNumber_digits": "0220635462",
    "callingPartyNumber_noa": "3",
    "calledPartyNumber_digits": "063581140",
    "calledPartyNumber_noa": "3",
    "locationNumber_digits": "644",
    "locationNumber_noa": "2",
    "locationInformation": {
        "vlrNumber_digits": "6442925077",
        "vlrNumber_noa": "1"
    },
    "mscAddress_digits": "6442925077",
    "mscAddress_noa": "{ $v->{noa} }",
    "callingPartysCategory_hex": "0a",
    "eventTypeBCSM": "2"
  }
}

Arguments

The following outbound arguments are supported.

Argument	Type	Notes
`serviceKey`	Integer	[Required]
`calledPartyNumber`	Binary String	This attribute can be specified as binary data. Alternatively, specify the individual components below.
`calledPartyNumber_digits` `calledPartyNumber_noa` `calledPartyNumber_inn` `calledPartyNumber_npi`	Digit String Integer Integer Integer	Hexadecimal Digits 0-9/A-F Range 0..127, default = 2 [unknown] Range 0..1, default = 0 [allowed] Range 0..7, default = 1 [ITU-T E.164] (All ignored if `calledPartyNumber` is defined).
`callingPartyNumber`	Binary String	This attribute can be specified as binary data. Alternatively, specify the individual components below.
`callingPartyNumber_digits` `callingPartyNumber_noa` `callingPartyNumber_ni` `callingPartyNumber_npi` `callingPartyNumber_pri` `callingPartyNumber_si`	Digit String Integer Integer Integer Integer Integer	Hexadecimal Digits 0-9/A-F Range 0..127, default = 2 [unknown] Range 0..1, default = 0 [complete] Range 0..7, default = 1 [ITU-T E.164] Range 0..3, default = 0 [allowed] Range 0..3, default = 1 [user provided, verfied] (All ignored if `callingPartyNumber` is defined).
`locationNumber`	Binary String	This attribute can be specified as binary data. Alternatively, specify the individual components below.
`locationNumber_digits` `locationNumber_noa` `locationNumber_inn` `locationNumber_npi` `locationNumber_pri` `locationNumber_si`	Digit String Integer Integer Integer Integer Integer	Hexadecimal Digits 0-9/A-F Range 0..127, default = 2 [unknown] Range 0..1, default = 1 [not allowed] Range 0..7, default = 1 [ITU-T E.164] Range 0..3, default = 1 [restricted] Range 0..3, default = 3 [network provided] (All ignored if `locationNumber` is defined).
`originalCalledPartyID`	Binary String	This attribute can be specified as binary data. Alternatively, specify the individual components below.
`originalCalledPartyID_digits` `originalCalledPartyID_noa` `originalCalledPartyID_npi` `originalCalledPartyID_pri`	Digit String Integer Integer Integer	Hexadecimal Digits 0-9/A-F Range 0..127, default = 2 [unknown] Range 0..1, default = 1 [not allowed] Range 0..3, default = 0 [allowed] (All ignored if `originalCalledPartyID` is defined).
`highLayerCompatibility`	Binary String	Specify this parameter as a binary or hex-string value.
`highLayerCompatibility_hex`	Hex String	(Ignored if `highLayerCompatibility` is defined).
`serviceInteractionIndicators`	Binary String	Specify this parameter as a binary or hex-string value.
`serviceInteractionIndicators_hex`	Hex String	(Ignored if `serviceInteractionIndicators` is defined).
`additionalCallingPartyNumber`	Binary String	This attribute can be specified as binary data. Alternatively, specify the individual components below.
`additionalCallingPartyNumber_digits` `additionalCallingPartyNumber_noa` `additionalCallingPartyNumber_nqi` `additionalCallingPartyNumber_ni` `additionalCallingPartyNumber_npi` `additionalCallingPartyNumber_pri` `additionalCallingPartyNumber_si`	Digit String Integer Integer Integer Integer Integer Integer	Hexadecimal Digits 0-9/A-F Range 0..127, default = 2 [unknown] Range 0..255, default = 0 Range 0..1, default = 0 [complete] Range 0..7, default = 1 [ITU-T E.164] Range 0..3, default = 1 [restricted] Range 0..3, default = 3 [network provided] (All ignored if `additionalCallingPartyNumber` is defined).
`forwardCallIndicators`	Binary String	Specify this parameter as a binary or hex-string value.
`forwardCallIndicators_hex`	Hex String	(Ignored if `forwardCallIndicators` is defined).
`bearerCapability`	Object
.`bearerCap`	Binary String	Specify this parameter as a binary or hex-string value.
.`bearerCap_hex`	Hex String	(Ignored if `bearerCap` is defined).
`eventTypeBCSM`	Integer	Range 1..10, 12..18
`redirectingPartyID`	Binary String	This attribute can be specified as binary data. Alternatively, specify the individual components below.
`redirectingPartyID_digits` `redirectingPartyID_noa` `redirectingPartyID_npi` `redirectingPartyID_pri`	Digit String Integer Integer Integer	Hexadecimal Digits 0-9/A-F Range 0..127, default = 2 [unknown] Range 0..1, default = 1 [not allowed] Range 0..3, default = 0 [allowed] (All ignored if `redirectingPartyID` is defined).
`redirectionInformation`	Binary String	This attribute can be specified as binary data. Alternatively, specify the individual components below.
`redirectionInformation_ind` `redirectionInformation_orig` `redirectionInformation_num` `redirectionInformation_nat` `redirectionInformation_reason`	Integer Integer Integer Integer Integer	Range 0..7, default = 0 [no redirection] Range 0..15, default = 0 [unknown] Range 1..5, must be specified Range 0..1, default = 0 [no interpretation] Range 0..15, default = 0 [unknown] (All ignored if `redirectingInformation` is defined).
`extensions`	Array of Object	Specify extension parameters as an array of Objects.
.`type`	Integer	Must match an `inap`.`extensions` number from the `ExecuteTest` request.
.`criticality`	Integer	Integer (Default = 0).
.`value`	Binary String	This attribute can be specified as binary data.
.`value_inner`	Integer/String	Used as INTEGER or OCTET STRING as per extension encoding. (Ignored if `value` is defined).